Summary

Since i have found the T-800 Terminator Exoskull of Landru in 2012 (THANXXX 4 THAT !!) >> ( http://www.thingiverse.com/thing:18317 )
i dreamt of a moveable version.

Now where it has worked here it is:

LEDs 5 mm can be obstructed. In the back of the head is burst for various electronics

Screwable together with M4x20 screws.

Instructions

"Terminator Head JAW":
Drill the holes (2) for the screws to "Terminator Head TOP" to 4mm
.
.
"Terminator Head TOP":
Drill the holes (2) for the LEDs in the eyes to 5mm
Drill the holes (2) for the screws to "Terminator Head JAW" to 3.2mm > Then drill to M4
.
.
"Terminator Head TOP V2":
Drill the holes (2) for the LEDs in the eyes to 5mm
Drill the holes (2) for the screws to "Terminator Head JAW" to 3.2mm > Then drill to M4
Drill the holes (4) for the screws to "Terminator HEAD BACK" to 3.2mm > Then drill to M4
.
.
"Terminator Head Back":
Drill the holes (4) for the screws to "Terminator Head TOP V2" to 4mm
Drill the holes (2) for the screws to "Terminator Neck" or "Terminator Neck V2 " to 3.2mm > Then drill to M4
.
.
"Terminator Neck" or "Terminator Neck V2":
*Drill the holes (2) for the screws to "Terminator Head Back" to 4mm
.
.
Screw together with M4x20 screws and ENJOY !!!

T-800 Terminator Exoskull moveable