Pollux v3 345mm Hexacopter

Build log:
https://imgur.com/a/T0d9x#Ek1Hh7p

First weekend flying on 4s :
http://youtu.be/u_tbkxdbuwg

3D Print Version of all plates:
http://www.thingiverse.com/thing:587029/
Thanks flow

Material Frame:
x16 M3x10 Nylon // Spacer Mount
x4 M3x15 Nylon // FC Mount
x18 M4x10 Alu // Arm Mount
x18 M4 Lock Nut // Arm Mount
x4 M3 Nut Nylon // FC Mount
x8 M4 Nut Nylon // Spacer
x2 M2x7 // Camera
x8 M3x35 Spacer // Tob Frame Spacer
x6 Zip Ties // Upper Body Mount
x3 Velcro straps // Battery Straps

Electronics:
1x Naze32 // Flight Controler
1x D4R-II // Reciver
1x Pololu D24V6F5 // 5v step down Power Supply
1x Immersion RC 5.8Ghz 600mw // Video Transmitter
1x Pololu UV12F12 // 12v camera Step Up Power Supply
1x Sony Super HAD CCD 600tvl // Flight Camera
6x Cobra 2204 1960kv // Motors
6x KISS ESC 18A // ESC
6x HQ 6045 // Probs

TODO:

• Add normal 35mm based camera mount.
• Add small hole in 3d Printed Side plate for body screw.
• Design a better landing gear solution
• Reduce wight of side plates