FPV Camera Tilt Mount made for MHQ2

Inspired by EricW's FPV http://www.thingiverse.com/thing:577287 I made this FPV camera tilt mount for the Hovership MHQ2(http://www.thingiverse.com/thing:511668)
with this camera:
http://www.banggood.com/600TVL-Pinhole-CCTV-Mini-Camera-for-Security-Surveillance-FPV-p-926406.html

and I plan to attach this servo:
http://www.amazon.com/gp/product/B00CCZ2CRA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A1ZOSWHLB9AJEY
I will mount the servo on top of the Upper Clean Layer with the tilt mount and connect a paperclip between the Servo Arm and the small whole in the top of the camera frame. Afterwords, whenever I adjust the 5th or 6th channel(whichever I choose to use) the camera should tilt Up or Down as the servo moves and pulls or pushes the paperclip and camera.
NOTE: you will need 2-4(depends one which mount you print) 7-8mm M3 screws to connect this to the top of the clean layer.
As well as an 18mm M3 screw and a M3 nut.