Magische Seile

Deutsch:
Die Idee selbst dazu stammt nicht von mir, sondern zufällig bei YouTube gefunden... - Hier das Original YT Video dazu: https://www.youtube.com/watch?v=z8kanih0sG4
und der Ersteller ist:
https://www.youtube.com/@PyroLeon

Der YT erstellt die Vorlage aus Sperrholz - dieses habe ich per TinkerCad nachgebaut und 2 kleine Änderungen vorgenommen.

Zur Erklärung:

2 Dreiecke werden NUR durch Seile gespannt und diese Halten die Konstruktion zusammen und sind sogar - je nach Größenordnung - belastbar.

Das Model kann entweder direkt gedruckt werden (kein Support, Cura-Standard Settings sind ok dafür), oder man kann das Model bearbeiten und in seine "Bibliothek" in TK übernehmen. Link:
https://www.tinkercad.com/things/clvoPdhQDzo-seilspielfrida/edit?sharecode=7EmsGdUdPQ_-V5CDGMCCQSABDEjkN87Rh4DH_wTXCCI

Als "wertvoller" Tipp:

2 Seile mit gleicher Länge abschneiden und befestigen - das 3. Seil an der Dreiecks-Spitze etwas länger lassen, da dieses Seil die gesamte Konstruktion spannt.

English:

The idea itself does not come from me, but found by chance on YouTube... - Unfortunately, I have the name of the Youtubers no longer parat, but will be, if I find, subsequently.

The YT creates the template from plywood - this I have copied via TinkerCad and made 2 small changes.

To explain:

2 triangles are stretched ONLY by ropes and these hold the construction together and are even - depending on the size - loadable.

The model can either be printed directly (no support, Cura default settings are ok for this), or you can edit the model and add it to your "library" in TK. Link:
https://www.tinkercad.com/things/clvoPdhQDzo-seilspielfrida/edit?sharecode=7EmsGdUdPQ_-V5CDGMCCQSABDEjkN87Rh4DH_wTXCCI

As a "valuable" tip:

Cut 2 ropes with the same length and fix them - leave the 3rd rope a bit longer at the triangle tip, as this rope tensions the whole construction.