Summary

A delta style tricopter.

Instructions

To be printed
===========

2x motor bases with fixed motor
1x tail base
1x tail motor holder (v1 or v2)
1x upper deck
1x control deck

Part list
=======

printed parts
vibration dampers (6 pcs)
plastic standoffs (4 pcs)
motors for 250 size racing quads (3 pcs) (such as DYS BE1806 2300KV)
15A ESC (3pcs) (such as AfroSlim)
9g servo
control board
6 inch props (6030)
R/C transmitter and receiver
M3 screws & lock nuts
Battery (such as ZippyCompact 1800mAh) - check dimensions. It has to fit on main deck.

Assembly
========

use M3 screws to join all bases together (delta shape)
install servo (do not forget to get it centered)
install tail motor part (2 mm dia axis 10-15 mm length on both sides is fine)
fix servo arm to tail motor part (to the flap)
use plastic standoffs to connect control and main deck. The battery has to fit between those decks
stick control boart to control deck using double sided tape (or simply drill holes and screw it)
install vibradion dampers and join motor part with main deck
install motors and ESCs (ESCs should fit under motor bases)
add R/C
connect everything to control board

Note: Small "hole" on upper and control deck is CG mark.