Summary

This was designed at the insistence of a 5 year old daughter who wanted a 'Light machine' The idea of the part is to allow a coffee mug to be up-cycled into a lamp

Instructions

3D print the Adapter ( note: this is a fairly large part approx 150mm diameter) assemble to coffee mug with the following

1x Lamp bayonet fitting with cord + Bulb
1x adapter (printed)
6x small screws ( I used M3 x 20's with nuts)
1x piece of 0.6mm Polypropylene sheet (approx 460mm x 340mm)
1x Coffee mug that you like.

If you need the base changed for a different diameter coffee mug please leave a comment.

Coffe cup Lamp adapter