RVOSD main board and GPS cradles

Designed for RVOSD boards and GPS. These securely hold the main boards and GPS while preventing the GPS connector from becoming loose. May upgrade later on to provide a cable strain relief function.

GPS module fits snug and can be secured with a small tie strap through the bottom channel, then mounted to the airframe.

Main board slides in on rails and held in place by a bottom stop clip.

UPDATE for v.2 main board

Moved the securing clips to the side and removed the bottom stop clip. This should help with hardmounting the cradle to the airframe while being able to slide out the main board for maintenance. A window was also added for the I/R RX as well.

Printed on K8200 @ 3mm with PLA.