FX Dreamline Single Shot Magazine with 6mm OD O-Ring

This is a single shot adapter for a Cal .177 (4,5mm) FX Dreamline derived from the work of prittstift from https://www.thingiverse.com/thing:4933071

The design was altered for the use of a 6mm outer diameter rubber o-ring (called R-01 in my set of o-rings) instead of the o-ring mounted in the magazine.

You need to download the file "FX_Dreamline_Single_Shot_Magazine_45mm.STL" from the original design, put it in the same folder as the .scad-file from this design und compile it with OpenSCAD.