PVS 14 Ocular Lens Cover

This is a lens cap for the Ocular Lens (the one close to your eye) of a PVS-14. I originally made the part a .1mm interference fit but it was too tight to remove once on, so I had to sand it a bunch to get it to remove correctly. I have since corrected that .1mm slip fit and made it exact sizing. You may want to scale the model up or down 0.25% to get around a .1mm scale difference in final width. I have not printed the model uploaded with the exact fit size, please let me know if it is too loose. Printed on an Anet A8 with PETG and 10% infill (i dont think the walls are thick enough to use infill anyways) at 0.2mm layer height. Came out good. I also made one have a hole in the middle, I don't know if people need that or not, figure I'd add it just in case someone wants a hole to see the tube.