IMPROVED Festival Cap / Party cap / Bottle cap / Festicap

If you want to stay HYDRATED during parties or fesitvals where they take the cap off the waterbottles, this print offers a great solution! Fits on the Spa/Coke and Chaudfontaine bottles often served at European venues. Passed the test on watertightness!

• Shouldered internals for watertightness
• Strong easy to print threads
• 4 different shapes (recommend the octagonal one)
• Optimizations for 3D printing

Tested with no leaks (PETG/ABS+ 0.2mm layerheight) when the cap is tightened properly. However due to stringing and blobbing PETG can be more troublesome, therefore clean the threads and internal cone! I also noted that PETG has a much higher friction coëfficient with these bottles and can therefore be harder to tighten/loosen compared to ABS+. Your milage may vary with other materials but the model should be more than sufficient for sloshing and holding it upside down with no to minimal drops.

• ABS or PETG
• 0.20 Layerheight
• 3+ Perimeters
• After printing check if threads and internals are clean

I will improve the design upon receiving feedback. If you wish to have the .STEP or .SLDPRT files, contact me.