ZWO Seestar S50 level pads

I designed some adjustment pads for the Seestar S50 for leveling the tripod.

I don't like the way of adjustment of the original ZWO tripod because you have to unscrew and screw the adjustment screws on the legs. After each adjustment you have to verify if the leveling is ok now.
So with the adjustment pads just make a rough adjustment of the tripod and then put 1, 2 or 3 of the pads below 1 or 2 legs legs and add or remove parts of them. (Only for fine adjustment!)
All parts have loose fit. Don't put too many below one leg. Better then repeat the rough leveling. I made 3 of each type.

I used PLA and 10% infill.