Summary

07.12.2023: added new version with looser fit

This is a lense cap for Seestar S50 telescope. It is designed for TPU printing only!!!

I used TPU shore95A. When inserting the cap to the Seestar lense hole you have to press it really to end so that it is flat on the front. Otherwise you will damage the mechanics when the Seestar goes into home-position. It is the same like the solar-filter.

Do not print with any other material that TPU, it will not fit!

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 S1 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> any TPU shore 95A                black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print slow with max. 30mm/s<br>print temeprature should be around 220°C depending on the recommendation of the filament brand.<br>vent speed 100%<br>retract 0.8mm on ENDER 3 S1 Pro and 40mm/s retract speed</p></div>

Seestar S50 lense cap (TPU printing only)