Teeter-Totter Building Blocks

蹺蹺板積木
以六角型為積木造型, 考驗你對建築結構的理解力
骰子的數字
1至4: 放上1至4塊積木
-1或-2: 拿走一塊或兩塊積木
六角形1至3: 積木上有實心的區塊, 如果擲出3個六角形, 可選一片有三個實心區塊, 或者三塊各有一個實心區塊的積木

3D列印切片要求:
層厚: 0.1mm至0.22mm
殼厚: 0.8mm 至 1.2mm
速度: 55mm/s
支撐: 只有部件A_1, A_2, A_3, 需要使用樹狀支撐, 其他不用
底筏: 視乎你的機器狀況, 使用[raft]會較安全]

Teeter-Totter Building Blocks feature a hexagonal shape and test your understanding of architectural structures.
Dice Numbers:
1 to 4: Place 1 to 4 blocks.
-1 or -2: Remove one or two blocks.
Hexagon 1 to 3: Blocks have solid sections on them. If three hexagons are rolled, you can choose a block with three solid sections or three blocks with one solid section each.

3D Printing Slicing Requirements:
Layer Thickness: 0.1mm to 0.22mm
Shell Thickness: 0.8mm to 1.2mm
Speed: 55mm/s
Supports: Only components A_1, A_2, and A_3 require tree-like supports; others do not.
Bed Adhesion: Depending on your machine's condition, using a raft will provide greater stability and safety.