Summary

This is a pretty small Poké stop marker that can be placed into the ground. At 14 cm from the ground (about 5 1/2 in.), Its small so that its mostly only noticed by people walking by it. Perfect for public places while not being too distracting for anyone else not playing Pokémon go. It does require a wire to stand up straight though trough it. I used 16 gauge multi purpose galvanized utility wire for it. Hope you enjoy, Oh and don't forget to get permission before placing.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Gizmodorks PLA                Clear

Post-Printing

How to put it together.

            <div><p>requires slightly rigid wire that has a diameter of less than 1.5 mm or 16 gauge around 12.5 cm (or 5 in), and a pair of longnose pliers.</p><p>1). Print out all the Parts and have the wire ready.</p><p>2). At the top of the wire make a loop that is about the width of the end of your long nose pliers.</p><p>3). start to slide in the parts one at a time onto the wire in this order from the top:<br>a small separator<br>the top of the bigger ring<br>a small separator,<br>top of the smaller ring,<br>a small seperator,<br>the poke ball,<br>a small seperator,<br>the bottom of the smaller ring,<br>the last small seperator,<br>the bottom of the top ring,<br>finally the last three large Seperators in a row<br>.<br>NOTE: you may have to hand drill the holes of the separators, the rings and the pokeball to make them slide onto the wire easier.</p><p>4). Once you have all the parts on the wire poke the wire through the hole in on the top side of the Pokestop Marker stake B and bend it along the ridge on the underside until it wraps around back to the top and flatten it. Straiten the main part of the wire with the separator rings, and poke ball as needed so it stands straight up from stake B.</p><p>5). Slide the notch of stake A into the notch of stake B, until they fit snuggly.</p><p>and you're finished and free to place the marker wherever you want. Have fun.</p></div>

Pokéstop marker