Newtonian Telescope 160mm (6.3 in)

Printable parts:

• cover.stl - optional
• bottom.stl - primary mirror mount
• mirror.stl - primary mirror holder
• _ring10mm.stl - small structural integrity support
• support.stl - large structural integrity support (optional)
• middle.stl - mount element
• top.stl - eyepiece and secondary mirror mount
• diagonal1.stl - secondary mirror holder part 1
• diagonal2.stl - secondary mirror holder part 2
• cylinder.stl - mirror tube (print in vase mode)
• cup.stl - cup for mirror tube (optional, print in vase mode)
• adjustment1.stl - altitude angle adjustment part1 (optional)
• adjustment1.stl - altitude angle adjustment part1 (optional)
• focuser.stl - focuser

Source file: telescope.scad

Additional parts:

• primary mirror 160mm diameter
• secondary mirror 35mm (diagonal ~ 50mm)
• 3 X threaded rods 3/8" diameter, length ~ FL of primary mirror
• 60 X 3/8" hex nuts
• 1.25" eyepiece
• 4 X M4*30 screw (primary mirror adjustment and secondary mirror holder)
• 4 X M4 hex nuts
• 3 X spring 10mm diameter, 20mm length