Bitholder for Makita Drill

This Bitholder fits al Makita 18v Drills.
There are separate Models for the 12v Drills.

It holds 5 Bits and one or two drill bits.

When you lay the machine on its side, only the plastic touches the surface, to avoid scratching your projects.

You need 1x M4x20 screw and 5x ⌀8x3 Magnets.

After printing I used a wood routerbit to ream the holes to size.
Then I used a hammer to fix the magnets in place.
May need some sanding to fit tightly in the slot on your drill.