Summary

Bank card length beard / hair comb that will easly fit in a wallet or a pocket
Second, much improved model

83 x 25 x 1,6 mm

It's in 3 versions:

Fine-tooth
Wide-tooth
mixed

All with additional flat models: 1,6mm vs 1mm high

Made in Blender 3D

Update 28 X 2023
Removed 'c47_3d' from models and cleaned them up a little
License is now just 'Attribution - Share Alike'

Print Settings

Printer Brand:

VoronDesign

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Voron 0</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Made for 0.4mm nozzle<br>Wide-tooth version can be printed with 0.6mm nozzle (teeth will be slightly cleaner than with 0.4)</p><p>The smaller layer height the better (better looking and little more durable) but you can print even with 0.2mm</p><p>You can resize the model in Z-axis for more strength</p><p>You can also print wide-tooth in 66% size with 0.4mm nozzle for even smaller comb<br>I would just recommend to leave 100% on Z-axis<br>You would get a 55 x 16 mm comb</p><p>I printed it in ABS, PET-G should work fine too<br>PLA will work but may break faster (the more moisture in filament the more brittle it gets)</p><hr></div>

Pocket Comb V2