Summary

My first design of a quadcopter. The idea was to make something small and simple to print on a 20x20cm printerbed.

Instructions

I printed it in ABS and fasten the topdeck to the droparms with a single piece of M3 threadrod with two locknuts. The droparms attach to the base with simple screws and maybe a dab of hotglue.

settings: ABS
0.4mm nozzle, layer height 3.2mm, 3 perimeters, 50% infill

~redid the cross stl file as some folks had trouble slicing

~added droparm file with different support and extra beefy bolt-wedge

bumblebee quadcopter