Summary

Remixed. Added a case for 6 dies with countersunk holes for 6mm x ~1mm magnets. Also added some circular dies.

For use with a caulk gun.

Print Settings

Printer Brand:

Bambulabs

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Bambu X1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>fine</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                    <strong>Filament:</strong> overture PLA                white                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>For the Dies:</p><p>Print with the threads facing up.</p><p>For the case: </p><p>Put the holes facing up so it doesn't need support. Might need support if your printer/filament doesn't handle slight overhangs well.</p></div>

Post-Printing

Case

            <div><p>When you go to put the magnets in, you should put super glue/ epoxy in the hole and hammer them in with a rubber mallet, or use a wooden stick so a metal hammer won't pull it out. Wipe off any excess glue after, and make sure the magnets are flush with the surface of the case or slightly shy of the surface. There is a decent tolerance for the magnet holes and for the tabs, but YMMV with your own printer's tolerance.</p></div>

Clay Gun Extruder with Case for Dies