Summary

I needed to change out the through pipe on my toilet. The builders used some no-name brand that has what I believe to be a non standard plastic nut. I could not find any wrenches at my local hardware stores, so I modeled one up.

The nut's outer diameter (minus the nubs) measures 65mm. Your printer needs to have decent tolerances to print this at 100 percent.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 Mega X</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.21mm Layer Height</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15% Gyroid</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The denser your print this, the stronger it will be... but mine worked fine with 3 perimeters and 15 percent infill. </p></div>

Toilet Wrench - Rounded 65mm