Jet 1325 Lathe hex filler caps and other

I designed a few small parts to fit my Jet 1325 Lathe.

The 6mm filler plug has a 19mm cap (needed one).
the 6mm and 8mm small filler plugs cover about 10-11mm
The threading rod plug fits into the right end bushing of the threading screw rod.

The back plate bolts onto the back of the cross feed to cover the backside of the opening. It also has a 10mm fine or super fine threaded hole to fit a Quans 5W LED flex stalk light like this: https://www.amazon.com/gp/product/B00INK4GRC/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1

unscrew the light head and take a picture of the 2 wires connection. De-solder the 2 wires, then take the whole thing apart and install to the back plate, then re-solder the wires.