Summary

A cosplay arm blaster.
Print Settings

Printer Brand:
Anycubic
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Photon Mono  X</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>hollow</p></div></p>                                                    <strong>Filament:</strong> doesn't matter resin                doesn't matter                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>If using PLA old school printer:</p><p>Printing temperature: 200 °C<br>Bed temperature: 50 °C<br>Speed: 50 mm/s<br>Layer height: 0.08 mm<br>Shell thickness: 0.80 mm<br>Retraction: 6 mm @ 25 mm/s<br>Infill: 50%<br>Initial layer speed: 20 mm/s<br>Initial fan speed: 0%</p><p>Initial layer thickness: 0.20 mm, 0.24 mm<br>Initial layer speed: 30 mm/sec, reduce further if you have problems<br>Number of slower layers: 5<br>Initial fan speed: 0%</p><p>If this makes you happy, feel free to throw me a tip at PayPal.Me/SMunger37</p><p>Set support infill to 5% and ZERO walls and it will come off the support base layer easier.<br>or<br>Turn on support interface at 2mm thickness and 50%</p></div>
Post-Printing

You should have a cosplay wrist blaster.
How I Designed This

I designed this in Tinkercad.
Arm Blaster
