Summary

This is a flat-bottom round well 96-well plate. It is not intended for commercial or clinical use.

To scale for standard 96-well dimensions, scale the object to 127.5mm in width and have "Uniform Scaling" checked. My print had a 9mm spread between the centers of the wells. I'm refining the design as I get more prints completed. Z dimensions can be adjusted taller if needed. The original print Z dimension is about 8.8mm.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Standard 0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30</p></div></p>                                                    <strong>Filament:</strong> Generic PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used a nozzle temperature of 205C and a bed temperature of 60C. I used brim plate adhesion with no support required. My filament was generic white 1.75mm PLA </p></div>