Summary

Case for Raspberry 5 with Pineberry Pi HatDrive! Bottom NMVE SSD expansion board.

The case has alternate retention mechanism and a slide out cover to allow access to the SSD without removing the case.

Details

Parts to Print

            <div><ul><li>x1 Case Bottom with threaded insert or Case Bottom with 3D printed threads.</li><li>x1 Case Lid.</li><li>x1 M.2 cover.</li><li>x4 foot</li><li>x1 M.2 retention clip if you want to swap SSDs</li></ul></div>                <p class="detail-title"><strong>Required Materials</strong></p>            <div><ul><li>x1 Raspberry Pi 5</li><li>x1 Pineberry Pi <a rel="nofollow" href="https://pineberrypi.com/products/hatdrive-bottom-2230-2242-2280-for-rpi5">HatDrive! Bottom</a></li><li>x4 M2.5 10 or 12 mm screws to attach feet to bottom and to board.</li><li>x2 M2.5 8 or 10 mm screws for lid rear.</li><li>x2 M2.5 4 or 8 mm screws for lid front (screws that come with board will work).</li><li>x4 M2.5 threaded <a rel="nofollow" href="https://www.amazon.co.uk/SHEENO-Knurled-Threaded-Bushings-Internal/dp/B09B6WRJ7F">inserts for 3D printing</a> if using threaded insert version of case bottom.</li></ul></div>                <div><p>I hope to improve this case in the future with support for HATs and better access to GPIO pins and camera connectors.</p></div>

Raspberry Pi 5 Case with Pineberry HatDrive! Bottom