Alastor The Radio Demon Microphone Staff from Hazbin Hotel

After watching Hazbin Hotel, I decided to design Alastor's microphone staff. It is a 1:1 replica of it

I've decided to make it 2 different ways, in one piece and in multiple pieces.
"Alastor Staff Full.stl" is the full staff.
I have designed it so that you can use a 1/2 inch diameter wooden dowel that is 48 inches long as the pole part. Print "alastor staff top.stl" and "alastor staff bottom.stl" if you want to make it like that. There should be a little wiggle room in the holes for the dowel, so you might want to glue it with E6000 glue or something.

Edit: If you want the length to be a bit more accurate, then you can cut about 4 inches off the wooden dowel. It won't be the exact right length but it's close. Additionally, it is an animated show, so the exact length could be different scene to scene, depending on the animator, so the length I described is based on the reference image I used.