Coordinate System Axes

Coordinate axes for visualization and communication of orientations and coordinate systems.

Print settings on Ender 3 V2:

• Layer height: 0.1mm or Adaptive Layer Height in Cura [0.1 .. 0.2mm]
• Adhesion: Brim, 4-5 line counts
• Nozzle Size: Works fine with up to 0.6mm
• Speed: Up to 80mm/s
• Infill: 20% for Center, 20% Line Infill for Arrows
• Material: PLA/PETG/ABS
• Support: No

Arrows are printed upright.