Summary

Total replacement for the sliding headband parts of the Anker SoundCore Life headphones.
Post-Printing

Printing
            <div><ul><li>Sliced with Cura, printed on Ender 3 Pro</li><li>Oriented as shown in stls</li><li>0.3 mm layer height for band.stl, 0.15 mm layer height for clip.stl and stopper.stl</li><li>20% infill</li><li>Support structures enabled, 75deg support overhang angle</li><li>Raft enabled</li></ul></div>                <p class="detail-title"><strong>Parts</strong></p>            <div><ul><li>2x band.stl, clip.stl, and stopper.stl prints</li><li>Anker Soundcore Life/Life 2 headphone with broken headband</li><li>1.5 mm dia. tool steel rod <a rel="nofollow" href="https://www.amazon.com/uxcell-Lathe-Round-Solid-Length/dp/B07KY8XJQL">(example)</a></li><li>Hacksaw</li><li>1/16 mm drill bit</li></ul></div>                <p class="detail-title"><strong>Instructions</strong></p>            <div><ul><li>Remove the existing parts. You’ll need to do some cutting and breaking.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/54/c5/61/49/0e/d3296b29-4e66-48b7-b886-d49f12cfd55b.jpg"></p>                <div><ul><li>Install the clip on the inside of the metal headband. Position the cable in the channel, and press the tabs through the holes in the headband.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/fe/3f/f4/30/5e/caf55b3a-7416-47c6-a747-2b333e89b6f5.jpg"></p>                <div><ul><li>Using the hacksaw, cut the rod into a 30mm section.</li><li>Partially insert the rod into the band. You might need to expand the hole using a 1/16 in drill bit. </li><li>Align the ear cup’s hinge with the rod, and push it through.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/db/35/3c/85/86/7b1d1448-c30f-4fb9-870a-bcb9ea362fa1.jpg"></p>                <div><ul><li>Slide the clip and the metal headband into the band.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/57/ae/43/5f/f5/4336bad1-8392-4083-979a-a45564acfe09.jpg"></p>                <div><ul><li>Press the stopper into the slot in the band. Apply superglue if loose.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/4e/f1/7a/e6/de/1856ef3d-763d-4fe5-8d44-82e08b0895c8.jpg"></p>                <div><ul><li>Stuff the cable into the band.</li></ul></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/91/e1/db/99/60/3098cf10-453a-40dd-9bdd-8c5c2f08ad15.jpg"></p>                <div><ul><li>Repeat for the other side.</li></ul></div>
Headband replacement for Anker Soundcore Life/Life 2
