D-Series XLR blank for 22mm rack panel push button

XLR blank to house a latching push button stitch inside a D-Series XLR cutout.

The blank is designed to be attached to a 1.2mm thick metal panel and supports a switch requiring a 22mm cutout. - The 1.2mm raised section surrounding the blank has been added to help centre the blank inside the cutout but is not critical to its structure.

When printing I used 75% infill to ensure this was as solid as possible to put up with long-term use.

When fitted this part cannot be seen from the exterior of the rack.

Use nuts and bolts instead of self-tapping screws to mount this to your panel.

Button used: https://www.ebay.co.uk/itm/395129967637 (22mm white ring)