Summary

a part to replace the walk-ski system on the Scarpa Maestrale 2024 to improve downhill behavior.
The aim is to keep the shoe supple during the descent.

Post-Printing

To assemble, 8 M3x20 screws and 3 M4x20 screws are required. The screws must be cut to size, otherwise the mechanism won't work.
You'll also need a spring 23mm long at rest and no more than 5mm in diameter. You can replace it with rubber bands, but you'll need to change them from time to time.
I recommend applying a little glue to the screws before screwing them in, to prevent them from unscrewing.

Translated with DeepL.com (free version)

adapter for scarpa Maestrale for Splitboard