Summary

Gandalf's Cart from 'The Fellowship of the Ring'.
Fireworks not included, and nor is the wizard himself. Bring your own horse. Space for a few hobbits in the back.
Made entirely from scratch except for 'Wood Sheet' by ByebyeRacing (thing no. 2291462).

Print Settings

Notes:

SUPPORTS
Supports will be needed for the wheels and part of the body.

WHEELS:
Supports will be needed under the spokes if printed lying flat.
BODY:
The yoke will need supports.
The wickerwork may collapse slightly during printing if printed without supports but if supports are enabled then you may end up with more support material than model.
AXLE:
No supports.

Post-Printing

Wheels will slot onto axle. Axle needs glueing onto body. For ease of printing, there is no connection mechanism.

(When I printed this the first time, the wheels and axle were not perfectly sized so I had to take off 1mm with a craft knife. The difference in the internal diameter of the wheel and the diameter of the axle is 0.5mm according to the STL.)

Paint and enjoy!

How I Designed This

Made in Microsoft 3D Builder.