3rd level and spacers for HPHELI F450 Quad DIY Starter Kit

These parts give the HPHELI F450 Quad a 3rd level to allow more room for parts (bigger battery), and a cleaner build.

Provided here:
3rd level plate
4 x 2.5x18mm standoffs (for mounting the plate)
4 x 2.5x6mm standoffs (for mounting the 4-way power adapter)

You will need:
4 2.5 x 25mm screws
4 2.5 x 15mm Screws w/nuts

Top layer = Receiver & Super Multi-Roter Controller
Middle layer = 4-way power adapter
Bottom layer = battery

Make certain the head of the screws for the 4-way power adapter are under the middle plate to avoid puncturing the battery below.

Use thread lock on all the screws/nuts