Print in Place pillow block v-bearing

Simple print in place V bearing made of only two main pieces with some optional covers. I built this to hold an elevation axis shaft for my radio telescope that will be held and driven by a slew drive. After filling with lube the side play reduced considerably.

There are two oiling ports that can be covered with M3 bolts to prevent leakage. I used a children's medication syringe filled with SuperLube to fill these ports quite nicely. There are also two optional covers to help seal the bearing races a bit from dust. This is meant for low speed applications.

Uploaded in Fusion360 and STEP formats to give you some options.