Summary

I found and remixed this hydraulic brake line clamp tool to accommodate the 5mm hex nuts and hardware I had on hand.
Print Settings

Printer Brand:
VoronDesign
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Voron2 350</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40%</p></div></p>                                                    <strong>Filament:</strong> Matter 3D Performance PLA                Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Remix from <a rel="nofollow" href="https://www.printables.com/model/612184-shimano-brake-hose-tool-with-hex-nuts/files">https://www.printables.com/model/612184-shimano-brake-hose-tool-with-hex-nuts/files</a></p><p>Voron printing rules (4 perim, 40% infill)</p><p>Note: 0.15mm offsets so ensure your printer is dialed in. Otherwise increase part size by ~1% to allow for easier insertion of the nuts. I've uploaded the STEP file to make modification easier. </p><p>Requires:<br>2x 5mm hex nuts</p><p>Add 2 separate pauses during slicing to allow for the insertion of the nuts.</p></div>
Disc Brake Line Clamp
