Systainer Interior for Tormek SuperGrind 2000

Systainer sys3 437 interior for Tormek SuperGrind 2000.

Printed the bottom inlay in 4 quarters. Full size stl file also available.

It doesnt't fit into a 337 systainer, so I added a cavity to store an additional grinding stone on the bottom to best make use of the additional space. Use a M12x60~80mm bolt to hold it down.

Four 10x3 cylinder magnets are press fit in the anglemaster (WM-200) holder. Ensure to align the magnet's polarity prior to pressing these into place.

The anglemaster holder and holddown are mounted using 4.5x15mm wood screws.

The grading stone is held down using 10x2mm velcro strips.

Printed the inlay with 5% infill, added cylinder modifiers with 100% infill underneath the machine's feet for additional strength.

Onshape document: https://cad.onshape.com/documents/f93d4eeba92171f7af9233c9/w/32c8cc404ea9507b797aec5c/e/c817817481833f5da0ed5035?renderMode=0&uiState=66125e0c5217eb3c0f5ce374