Throat Plate for 20" Jet Bandsaw

This is a throat plate for a 20" JET band saw. I put a slot in one of them, the other one you can cut yourself.

Do not try to to cut this without a jig or something to protect yourself. It could easily pull your fingers into the saw.

I only needed the slotted one, I have not even printed the zero clearance one so it is completely untested.

Not responsible for lost fingers.

There are multiple size openings for the 20" band saw I have been told. This one is for the 2.5" hole. Part is 2.45" in diameter.

I printed in PLA, Nylon CF would be a good option, or if you are cutting the slat, TPU might work well. I use a large 1 1/4" blade in my saw on most days. The slot is likely too large for a smaller blade.