Minirig 4 Owl Case

I have improved the Owl case so it now is compatible with the Minirig 4. I have added a center clamp to sufficiently hold the Minirigs in the case, and I have exposed the USB C port so you can leave the Minirigs in the case and still charge them.

Print one of everything, except print 2 of the center clamps and 2 sub rings.

The left and right side of the case are held together like the original, with 2 M5x40 screws and 2 M5 nuts. One 5mm hole needs to be drilled into the handle for the center clamp. Hold one side of the clamp in position between the minirigs and drill in the center of the hole, all the way through the handle. An M5 nut secures both sides of the center clamp together. (see last 2 pictures)

Printed in PETG at 0.2mm with 50% infill. The only part that requires supports is the center clamp.