AZ3 mount adapter for MAK telescopes

This accessory allows you to use a MAK telescope on an AZ3 mount.

You will also need:

• 2 bolts Ø1/4“ x 1-1/4” (end bolts)

• 1 bolt Ø1/4“ x 7/8” (center bolt)

• 3 nuts and 3 washers Ø1/4”

• You can add a thin rubber sheet for a better grip on the telescope (not shown in the pictures).

• If you want to use konbs for your bolts you can download them at the following link: https://www.thingiverse.com/thing:6615758