Summary

This is a bracket and hinge for mounting DC42's PanelDue LCD Control Panel on the Reprap Ormerod.

Instructions

You will need two M5 nuts and 180mm of M5 screwed rod.
I originally intended to bolt the hinge to DC42's case, however ended up using superglue which is more than adequate over the base area of the hinge.
Clean the holes with an M5 drill bit.
Press the M5 nuts into their recesses. i used a vice.
Attach bracket/panel to RHS of Z axis using two m4 pan head screws or cap screws and standard m4 channel nuts to suit z-axis extrusion.
insert the screwed rod and fit the clamping knob

Ormerod PanelDue mounting bracket