GODSPEED YOU! BLACK EMPEROR - ALBUM COVER COASTERS (+BONUS)

Here are some coasters from the album covers of the legendary post rock band, made using the filament painting method!

Each coaster is 10 x 10 cm in size and has an average base standard of 1.76 mm. If you want to scale the size kindly don't change the Z width/thickness to print according to instruction.

You have to to add pause command at the mentioned layers and manually or automatically swap the filaments. You can print these in multicolor without MMU or AMS. Some slicers such as PrusaSlicer or OrcaSlicer have adding pause command to selected layer in their interface, but if you are unable to use those slicers with a quick research you can find how to add pause command to your g.code file.

Instructions For Each Album:

1) G_d’s Pee AT STATE’S END!
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Black filament
At layer #13 (1.12mm) swap to White
At layer #18 (1.52mm) swap to Bone White or continue with White for the rest.

2) Lift Your Skinny Fists Like Antennas To Heaven
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Black
At layer #9 (0.8mm) swap to Red
At layer #12 (1.04mm) swap to Brown
At layer #19 (1.6mm) swap to White for the rest.

3) Slow Riot for New Zero Kanada
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Black
At layer #21 (1.76mm) swap to Orange or Bronze for the rest.

4) F♯ A♯ ∞
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Black
At layer #17 (1.44mm) swap to White for the rest.

5) all lights f**** on the hairy amp drooling
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Black
At layer #21 (1.76mm) swap to White for the rest.

6) BONUS: A Silver Mt. Zion - He Has Left Us Alone But Shafts Of Light Sometimes Grace The Corner Of Our Rooms
⦁ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
⦁ Start with Red
At layer #16 (1.36mm) swap to Black for the rest.