Summary

PURPOSE of this thing is
to help MARKING DRILLING OPENINGS for concealed cabinet door hinges.

Especially this one is for "FGV SlideOn", crank 0° type and 18mm chipwood plates i.e. 110° door opening assuring 1 mm gap with the neighbouring door.
If no other doors are present, it's edge can be set by the adjustment screws to be flush with the cabinet walls when closed.(tested)

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Photon Ultra</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.030 mm on Z-axis</p></div></p>                                                    <strong>Filament:</strong> Copymaster resin                clear                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed for about 5 hours 50 minutes. Supports are added after rotation 32° on X-axis. Used CopyMaster Water washable clear resin. Print came out with a flaw on 2 edges, but test on real chipwood was OK.</p><p>On the surface are added some measurements. Before print, You may want to add Your own remarks/reminders. If slicing software allows it.</p></div>

Post-Printing

                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/5d/da/12/3f/64/84853bcf-a874-4128-8db8-0ef0111e71e7.jpg"></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b9/60/e6/f3/5b/f1fc91c0-e63e-4a33-920c-96d97a5e72f0.jpg"></p>

How I Designed This

Blender 4.1.1.

            <div><p>Took me about 7 hours (I am not very good in Blender)</p></div>

Custom Section

Hope it works for You too.

cabinet door hinge drilling template(old variant)