Summary

This is a simple and clean way to mount your Anker 313 wireless charging unit into ikea furniture or any Table Base. I am using it to mount a wireless charger to Kallax shelves we use as nightstands. I haven't tested it on any other furniture but it should work just fine.

Needed Parts

3x Screw M4x12
1x Wireless Charging Holder
3x Holding Bracket
1x Template (optional but highly recommended)

Installation

For simpler installation use the template included in the files.
It includes all 3 positions for screw holes as well as the radius of the holder to mark on the wood.

For Installation, lay your template onto the desk, mark all three holes as well as the interior edge of the template.Drill three Holes (9mm) and use a router to cut out the interior cavety where the charger is going to sit.

Keep in mind that this holder is designed for hollow Ikea furniture with thin walls (Kallax, Lack ...). With those, routing or cutting the hole is simply done from one side. When using a table base that is solid, you will need to route out an extra cable channel for the power plug from the bottom side, since it protrudes out from the charger.

Anker 313 Wireless Charger Desk Mount