Youtube link:
https://youtu.be/VlZ04lazjds?si=rbhJKmXXA7QkVEgT

Decathlon 'Forclaz bivouac 500' head torches: https://www.decathlon.co.uk/p/rechargeable-head-torch-100-lumen-bivouac-500-usb/_/R-p-307266

I designed and built a version of light therapy glasses using 2xDecathlon 'Forclaz bivouac 500' head torches, 3d printed parts and reflective/holographic blue self adhesive sticker film.

The 3d printed parts are assembled using 3m VHB tape and I added a 5mm EVA foam strip where the glasses contact my head. I used double layers at the front of the head torches to give them a downwards incline. Combined with the orientation of the visor this gives good illumination to my upper face when I wear them.

The headband is reused from the head torches themselves and fits into the slot on the front of the headband - this needs to be opened up after printing to allow the headband to be threaded through.

Disclaimer: Experimental Use Only

These light therapy glasses are experimental and have not been tested for safety or efficacy. By using the provided design files and instructions, you acknowledge that you do so at your own risk. The creator of these files and designs is not responsible for any harm, injury, or damage that may occur from the use or misuse of these light therapy glasses. These glasses are not intended to diagnose, treat, cure, or prevent any disease or medical condition.

Important:

1. Use at Your Own Risk: The design and use of these glasses are strictly for experimental purposes. Users must take full responsibility for any risks involved.
2. Medical Advice: Consult with a qualified healthcare professional before using light therapy devices.
3. Liability: The creator of these files and designs assumes no liability for any damages or injuries resulting from the use of these glasses.

By downloading and using these files, you agree to this disclaimer.