18v Workzone Tool (Blue) to Ozito PXC Battery Adapter

Adapter for older 18v Workzone Tools to fit Ozito PXC Battery

For the terminals you'll need 4 pieces of 5x25x0.5 mm solderable metal (I used half hard copper)

• Tin the top of two and the middle of the other two terminals and slot them into place
• Check the fit on the tool side. If the adapter doesn't slot in all the way, then the two horizontal terminals are not in the correct position
  • Make sure there is a small gap between the adapter and the bottom of the horizontal terminals on the tool side
• Once the terminals are aligned, solder them together
• Fit the adapter to the tool, and slot in the retention tab. Screw in a 3x25mm bolt to keep it in place.