ZMR 250 Tilt Gimbal

Simple Tilt Gimbal for the ZMR250

• You will need a board cam, with the pcb bezel cut.
• HXT 500 servo
• Pushrods / music wire 1.2mm
• Requires the 5mm Aluminum Stock Standoff's
• Any FC that can controll a servo gimbal.

The Parts excluding Camera & Servo are 11.5g for the full gimbal.

The gimbal can be assembled outside of the frame, when finished, just slide it over the aluminium standoff's.

There is also a simplified Camera Holder available for easy printing