Summary

This wall mountable pocket will help when installing the Unifi Ultra 201W 8 port switch as their design for the power supply does not have a wall mount, while the switch itself does. It makes a much nicer looking install and keeps things neat.

Printing with White filament can make it even better...I was just too lazy to switch out the filament.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                    <strong>Filament:</strong> TEQ Stone PETG                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The printer is the AC Kobra3, not dialed in at all yet.  Just got the replacement head (gratis) after the original one self destructed because of the silicone sock....Anyway-</p><p>I printed this on its back and used no supports for the power cord hole and the bottom lip of the pocket, I did include a 5mm brim. I highly recommend a brim on the print. The print time is estimated at 1h and 19 mins.  it used about 12.25 M of filament according to the Orca slicer.  It was printed on a PEY build plate with a nozzle temp of 255 for all layers and a build plate temp of 70 first layer and 80 throughout remainder (all Celcius).  I did not use supports at all, other than a 5mm brim so there was some stringing along the top edge and power cord port, but just some quick trim and deburr and life was good.  Works like a champ.</p></div>

Post-Printing

If you print this without supports laying on its' back you'll need to trim some stringing

            <div><p>Without supports the top (front edge as mounted) will have a rough inner surface and some stringing that needs to be trimmed, as well as the top (front edge) of the power cord port.</p></div>

Custom Section

                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/91/fd/4a/53/0a/c7fdd17a-f919-4ae5-9986-def52f5d8b5d.jpg"></p>

Unifi wall mount for 210W power supply