Summary

PURPOSE of this thing is

to help MARKING DRILLING OPENINGS for minifix set.

This one is for 34mm lenght of the connector screw and 18mm chipwood plates and depth of the 15mm diameter opening usually is no more than 13mm. Hence "11-13mm" marking.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Photon Ultra</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>50um</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>n/a</p></div></p>                                                    <strong>Filament:</strong> n/a resin                n/a

Custom Section

For using centre finder, put template on the side of the worked plate, rotate slightly until feeling sides firmly contacted, then touch on the centre notch with the pencil and mark underlaying surface by sliding.
Instead of this stupidly long explanation, You may want to see the picture of the other template.:)

Drill template for minifix