Summary

History trembled the day the Rubber Band Blaster-32 was first forged. Squeeze the trigger briefly and fire once, hold it down and release a torrent of rubber bands. Quickly reload by simply replacing the barrel and keep going.

Slow motion video: https://www.youtube.com/watch?v=CEQ0T4qCQKU

Instructions

Videos:
Reloading: https://www.youtube.com/watch?v=m4xSol8nA3I
Assembly: https://www.youtube.com/watch?v=i-P6L7N33EY

Uses #32 rubber bands

In addition to the printed parts you will need:

1- Right Angle, Single Sided Geared Motor
1- 2xAA Battery Holder
1- Large, Red Classic Momentary On Switch
1- 7" by 3/8" Dowel
1- 2.5" by 3/8" Dowel
1- Screw Eyes 5/16" Inside Diameter
1- Screw Eyes 1/8" Inside Diameter
1- 5" Two Conductor Insulated Wire
2- 3" Single Conductor Insulated Wire
3- #6x5/8" Screws
2- #4x1" Screws
1- #2x1/4" Screw
1- 4.5' Nylon String

Use your own non printable parts or order the kit with the non printable parts online at http://www.shuttlebaylabs.com

PS This was part of a KickStarter that I did last summer:
https://www.kickstarter.com/projects/1260445854/automatic-rubber-band-blaster-kit

Automatic Rubber Band Blaster-32