The Black Pearl Mk2

This is my rebuild of the model I remixed before beacause I wasnt satifyed with its accuracy to the real Black Pearl. This new version has a repaired beake, new figure head, new guns, decking, lower decks, new railings, new lanterns, new stern wall, and printable ratlines(not completly done yet, but they are just easy to add on later).

There is now a guide to how to build it https://docs.google.com/document/d/1d4GQDBp09j5S5EtUfAZCCRJxM-8rCwDUCyWZlDsVTxA/edit?usp=sharing

There are additional cargo details and an improved crows nest for each mast as well as a better stand here:
https://cults3d.com/en/3d-model/gadget/black-pearl-accessories

While it should now be possible to fdm print the at 100 percent scale, I still recomend printing it at 150 minimum seeing at the supports are likely to rip apart the railings at 100. The deck guns are also now seperate to make them easier to print and look better.

Please let me know if there are any problems with the model or printing it, or if you think that there is anything else that I can add to it to make it better.

Update 9/1/24:
Don't use the non zipped full hulll file if you want to cut it differently than I did, use the one that is zipped, the 3mf is just an assembly reference and has serveral small gaps.

While not much is likely to change with the main hulls, I am going to add the rest of the ratlines soon, aswell as anymore details that I want to add.

Update 9/11/24:
Added new Hull parts with new hull dets: Gangway mounts and Skylight and wheel base improvements. The Bow mk2 is only zipped because of thingiverse size limt:

Update 9/14/24:
Added the New versions of the sliced hull parts to have the new details, Also added more detailed version of the masts

Update 9/15/24:
Lower cargo grate added to the bow section, which now has to be zipped.

Update 9/18/24:
All ratlines completed and renamed for easier printing, Added divots in the masts to mark where sails go and make it easier to print them, and changed Mizen Mast L1 Ratline to allow for the sail to be mounted. I also have added the lower cargo grate and bow grate the the smaller slices of the hull. The cargo grate file has also been changed to allow for easier use and more visability for below decks

Update 9/20/24:
Added a cut of the bow that will fit on ender 3s:I did make a mistake with the scaling so if you did download the first ones(the new ones are in 1 zip) then just know that 100%is 150 compared to everything else- and they are not the same or compatible with eachother.

Update 9/30/24:
Due to the large amounts of files that this is getting to have, I am zipping some together for simplicity. I have fixed the holes in the hull under the deck: Also I do know that the masts are hard to build, there are going to be connectors in them soon.Use the Zipped hull files for the smaller cuts

Update 9/30/24:
Big Update here: Adding new connectors to all the masts and the decks, unless people really want some for the hull: I do not plan on adding them since they make the ship far more difficult to print and my, expirence has been that there is not a good way to do them. That said they were needed for the masts. There is also now a guide to build the ship - feel free to reach out if there is something that I left out of it.

Update 10/14/24:
The first printable sails have been added, these are the non ripped versions. I am making torn up versions to give the ship her look from the first movie. They are ment to be printed at 150% scale, seeing as I wanted to make them as thin as possible, but they might work at 100% with thin walls.-They are all zipped into 1 file to keep them seperate. They are not marked so be careful.