Summary

This is a 3D model of Meridia's Beacon with a lid and space for a vibration sensor, intended to be hooked up to Home Assistant to play noise when picked up.

Lid is held on by 6 magnets, each 2m thick and 6mm in diameter.
Zigbee vibration sensor used: https://www.aliexpress.us/item/3256807375120948.html

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10 MAX</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15% Support Cubic</p></div></p>                                                    <strong>Filament:</strong> Doesn't Matter (I used Inland) Silk PLA                Silk White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Model is oriented upside-down to ensure the cavities for the magnets and vibration sensor get enough support from the internal supports,and support cubic is used to keep material cost low. If you do use support cubic, BE CAREFUL when removing supports, as there is not a lot of support around the edges of the walls and this can cause splitting if you aren't careful.</p><p>You can flip the model upside-down and print that way for better overall internal support, but you cannot use support cubic this way, otherwise the cavities for the magnets and vibration sensors may pop out. (which is a huge headache believe me I made this mistake)</p></div>

Post-Printing

Meridia's Beacon (with space for vibration sensor and lid)