Sony HDR AS20, AS15, etc. No-Gimbal Mount for DJI Phantom 2

I have progressed beyond this to working on a gimbaled version, but thought someone might want to use these files which I used on my testbed Phantom a couple of months ago.
I will post the sequel with a controller when I get it finished.
You will need to use 2 M3 screws and nuts to attach the bracket to the plate and an M5 (or M4 with a sleeve) screw and nut for mounting the camera clamp to the bracket. You will also need 4 anti-jello rubber mounts: 7mm x 21mm. Not the tiny DJI type.
Print 2 plates. These plates have all the holes for this design and will be the same for the controller and gimbal version.
You will also need 4 M3 screws to attach the upper plate to the body of the Phantom.
That white thing is a lens cap available elsewhere here on Thingyverse.

AN ALTERNATE PLATE DESIGN CAN BE FOUND HERE:
http://www.thingiverse.com/thing:677486